1 / 5
Model No. : | Heat Exchanger Tube |
---|---|
Brand Name : | YUHONG |
Certification : | CE |
Descrição do produto
Tubo sem emenda do permutador de calor, ASTM A213 TP316L 25.4mm x 1.245mm, 1.4404 / SUS316L
S especificação :
ASME SA213 / A213 : Especificação padrão para ligas ferríticas e austeníticas sem costura
Caldeira de aço, superaquecedor e tubos de trocador de calor de aço inoxidável.
ASTM A249 / A249M : Especificação padrão para caldeira soldada de aço austenítico, superaquecedor, trocador de calor e tubos de condensador.
Outro padrão: DIN 17456, DIN 17458, EN10216-5, GOST 9940-81, GOST 9941-81, JIS-G3463, ...
Grau de material:
American Standard |
Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L- Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Others:TP405,TP409, TP410, TP430, TP439,... |
Europen Standard |
1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571,1.4438, 1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501 |
Russia Standard |
08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2, 08Х18Н12Б,10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т, 08Х18Н12Т,08Х17Н15М3Т,12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ |
Faixa de tamanho :
Production |
Outside Diameter |
Wall Thickness |
Heat Exchanger Tube |
6.00mm to 101.6mm |
0.5mm to 8mm |
Acabamento final
Solução recozida e em conserva / recozida brilhante.
Tipo de Tubos:
Curva em U e reta.
Alguns dos testes de qualidade realizados por nós incluem:
Corrosion Test | Conducted only when specially requested by the client |
Chemical Analysis | Test done as per required quality standards |
Destructive / Mechanical Testing | Tensile | Hardness | Flattening | Flare | Flange |
Reverse-bend and Re. flat tests | Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end |
Eddy Current Testing | Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System |
Hydrostatic Testing | 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s . |
Air Under Pressure Test | To check any evidence of air leakage |
Visual Inspection | After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections |
Testes Suplementares: Além dos testes mencionados acima, também realizamos testes complementares dos produtos fabricados. Os testes realizados sob este incluem:
|
|
|
Envie sua pergunta a este fornecedor