Drywall Galvanized channel Stud Track Roll Forming Machine

Drywall Galvanized channel Stud Track Roll Forming Machine

Drywall Stud Track Roll Forming Machine can produce many kinds of keels ,such as C-shape,U-shape,L-shape,Omega-shape and T-bar.The products can be used as the main force structure of medium-sized industrial and civil buildings ,such as factories, warehouses, garages, exhibition halls, theaters, stadiums.

Drywall Stud Track Roll Forming Machine is composed of the following parts: manual decoiler, feeding and flatting system, (punching device,) main roll forming machine,cutting device, hydraulic station, PLC control system and receiving table.

technical parameters of Drywall Stud Track Roll Forming Machine

Decoiler

Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system

Loading capacity: 3T

Uncoiling width: 500mm

Main roll forming machine:

Feeding and flatting will make sure the steel is neat clean and straight.

the Material of rollers are GCr12MoV,while the shafts are made up with 45# steel.

Roller fixer : Guide column

Frame : middle plate welded Memorial arch frame type

Speed: 5 - 50 m / min

Drive mode: gear

Diameter of shafts: φ 40mm

Shearing machine:

The shearing machine adopts pillar style with rack & pinion system frame and non-contact photoelectric switch. The material of blades are Gcr12.

Electic Control System:

Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.Equipped with movable switch, air break, radiator, transformer & electric leakage protector for operation convenience and safety.

Sometimes there are some embossing and holes on our customers samples. For the holes, a punching device must be added. For embossing ,we usually put the embossing model on the former rollers .If you want your logo to be printed an the keel,we have two methods.One ,the same as getting holes ,add a logo punching system in front of the hydraulic station.Or we make some changes on the rollers.Then you can get your logo while roll forming.

our service

1. training

a.we will send you user manual and video to teach you to install and operate.

b.If buyer needs our technicians to go to your local factory, please arrange board and lodging . And the buyer need pay the technician USD80/day for salary.

c.There need one technician for one week.

2.After sale Service

a.One year guarantee for whole machine.

b.24 hours technical support by email or calling.

c.If there is any problem found in ourmachine, we will repair it for free in one year.

Packing

1.One 20ft or 40ft container for loading one set machine with manual decoiler.

2.The whole wiped anti rust oil ,PLC controller covered by foam film.

3.Spare parts and some small parts packed in plastic tooling box.

4.All components of Deck Roll Forming machine fixed by steel wire.

Cangzhou ZHONGTUO Roll Forming Machinery Co., Ltd is a professional manufacturer and exporter of cold roll forming machines.The final products our machine produce are widely used in steel structures. All products comply with international quality standards and are greatly appreciated in markets throughout the world, such as Asia, Africa, Europe,South America, Australia and so on.Our machine has passed ISO 9001 CE .