Entrar Junte -se gratuitamente
1 / 5
App Charging Post Z3 7KW
Options:
- CW-JL-Z3/384.8 * 249.8 * 129 PC operating ver
| Model No. : | CW-JL-Z3 |
|---|---|
| Specification : | CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
Yangjiang, Guangdong, China
- Fabricante
- fornecedor de ouro
- Certificação da plataforma
Descrição do produto
|
Product Name |
Charging Post Z3 7kw light guide column section |
|
Model |
CW-JL-Z3 |
|
Specification |
CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
|
Charging mode |
Two-dimensional code scanning charge |
|
Means of communication |
Either 4G or GPRS |
|
The length of the gun line |
5M (optional non-standard length) |
|
human–computer interaction |
RGB light strip |
|
Rated Voltage |
Single-phase three-wire 220VAC |
|
Rated power |
7KW(220VAC) |
|
Working Frequency |
45~65Hz |
|
Max. Rated Current |
32A |
|
Operating Temp |
.-40℃—+50C |
|
Protection Class |
IP65 |
|
Number Of Jacks |
New national standard 7 holes |
|
General Standard |
GB/T 18487.1-2015，GB/T34657.1-2017; |
|
Protection function |
Under-voltage, over-voltage, over-current, over-heat, short circuit, leakage, full automatic stop, ungrounded protection |
|
Warranty |
One-year replacement, three-year warranty, lifetime maintenance |
|
Precautions |
1, when installed in open-air places, it is recommended to be equipped with electrical boxes. 2. Make sure the ambient temperature is between -20 ° C and + 50 ° C. Keep away from open fires or baked goods and avoid high temperatures. 3. There should be no strong vibration, inflammable and explosive materials near the installation site, and good ventilation. Shall not be placed in corrosive, corrosive or humid air. Adequate space for cooling and ventilation must be reserved. 4. The installation shall not be located in low-lying areas or in areas prone to water accumulation. The installation site shall not be higher than 2000m above sea level. 5, bracket installation without wall support, it is recommended to use wall-mounted installation, if the use of floor-mounted bracket, fixed installation. Pile installation, should ensure that the pile vertical, and avoid vehicles may pass the route. |
2. Conecte a pistola de carregamento para a porta de carregamento do veículo elétrico, a luz indicadora está sempre acesa em azul, indicando uma conexão bem -sucedida. solicitado pelo aplicativo para começar a carregar, a luz indicadora pisca verde, indicando carregamento normal.
3.APAP FIM DO CONGULTA ： Clique em "Parar de carregar" no aplicativo ou pressione o botão na arma para parar de carregar. Inclua a pistola de carregamento do conector do veículo e coloque -a de volta no lugar, carregando paradas.
Yangjiang, Guangdong, China
- Fabricante
- fornecedor de ouro
- Certificação da plataforma
Envie sua pergunta a este fornecedor